* Overdrive and Compression on two separate channels with individual tone controls.
* Overdrive channel sounds like the original TS808 and even uses the JRC4558 op-amp.
* Unique overdrive bass boost switch.
* Compression channel can be set for fully squashed "Nashville" sound or very subtle compression.
* Compressor also has an integrated pre-amp controlled by a Gain knob so you can get loads of clean gain without overdrive!
* Combine the channels to heat up leads.
Route 66 American Overdrive is sure to become as legendary as its namesake. With classic compression combined with classic overdrive modeled after the sound of the original TS-808 Tubescreamer (JRC4558 chip and all!), the Route 66 pedal gives you two great effects for the price of one. The two effects sound great on their own and can also be combined to compliment one another. In fact, probably the only complaints about the original Tubescreamer was that it did not have much sustain or bottom end. That won't be a problem with Route 66. Just combine the overdrive side with the compression side to get all the sustain you want. Add the Overdrive Bass Boost and give it that big cabinet sound. If you love the clean sound of your guitar and amp, but just want a clean boost, kick in the compressor with the Gain knob up a bit. We've added a pre-amp stage to the compressor to allow for a truckload of gain, with or without overdrive. Using Route 66 American Overdrive with a good tube amp is sure to make it sing! Classic.
List Price $169
Our Price $129.95
MC-5 MULTI-PLUG 5 CABLE,
* The ONLY daisy-chain available with right-angle plugs!
* Over 12" between plugs!
* Spring-loaded contacts in the input socket keep the 1 SPOT plugged in securely.
* Link Multi-Plug 5 cables together to power even more effects!
Our Price $12.99
This page was last updated: June 5, 2011
Converters $2.99
CL-6 Converter
for the 1 SPOT
Allows the 1 SPOT adapter and Multi-Plug 5 cable to be used with Line 6* modeling pedals and the Digitech RP100.
• Right-angle plug is ideal for crowded pedal-boards!
1 Spot
MC-8 Multi-Plug 8 Cable for 1 SPOT
Power up to 8 effects with a single 1 SPOT adapter using this cable accessory.
The Visual Sound Multi=Plug 8 Cable is an accessory for the 1 SPOT 9V DC adapter. Takes up only one spot on a wall or strip outlet. The Multi-Plug has 8 right-angle plugs for daisy-chaining power, with over 12" between plugs. You can also link other Multi-Plugs together to power up even more effects or pedals. Multi-Plug uses spring-loaded contacts in the input socket to keep your 1 SPOT securely plugged in.
NOTE: The 1 SPOT cannot be used to power multiple LINE 6 ToneCore Pedals due to inadequate power supply filtering in the pedals. A 1S POT can be used with one ToneCore Pedal with only a minimal amount of noise. More than 1 ToneCore pedal on a daisy chain causes too much noise for practical use.
Visual Sound Multi-Plug 8 Cable for 1 SPOT Features:
A daisy-chain available with right-angle plugs
Over 12" between plugs
Spring-loaded contacts in the input socket keep the 1 SPOT plugged in securely
Link Multi-Plug 8 cables together to power even more effects
Our Price $14.95
V-35 3.5mm (1/8) Converter
The 1 SPOT 3.5mm Converter allows the 1 SPOT power adapter to power Electro-Harmonix - older DOD - and other pedals that require a positive-tip 3.5mm (1/8") plug.
NW-1 Visual Sound One Spot 9VDC / 1700 mA Adapter
The Visual Sound One Spot 9VDC / 1700 mA Adapter is the original 9V DC adapter that only takes up 1 Spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years!
•Only takes up one position on your outlet strip or wall outlet!!
•Handles from one to over twenty guitar pedals (1700mA max!)
•New heavy duty output cable!
•Use with optional multi-plug cable(s) for powering more than one pedal.
•Guaranteed to work with any equipment that uses one of the following adapters (over 90% of the effects pedals on the market!): Boss PSA, Boss ACA, Danelectro DA-1, DOD PS-200R, Dunlop ECB-03, Ibanez AC-109, Korg A30950, Morley 9V, Zoom AD-0006.**
•With new converter plugs, the 1 SPOT will work with virtually ANY 9V pedal! ...even Line 6 modeling pedals! **
•Will even convert international voltage (100V-240V) automatically; no transformer needed!
•3 meter (10') cable is almost twice as long as other adapter cable
